Novus Light Home

Blog

Cyan-Tec Laser Cell

Cyan Tec Systems has been selected to design and build an exciting custom laser welding system for the Nuclear Advanced Manufacturing Research Centre (Nuclear AMRC), one of seven High Value Manufacturing (HVM) Catapult centres funded by Innovate UK. The Nuclear AMRC in Rotherham will be taking delivery of the turnkey system before the end of 2017. Cyan Tec, based in the UK’s high tech heartlands in Loughborough, has extensive experience in integrating high power fibre-delivered lasers in large systems for automated laser welding and cutting

The Nuclear AMRC helps UK manufacturers win work in the civil nuclear sector and assists them in the development of new technical capabilities and processes. Situated on the Advanced Manufacturing Park in South Yorkshire, the Nuclear AMRC research facility offers an array of state-of-the-art equipment for machining and fabrication, supported by in-house engineers and researchers, all of which are made available to manufacturers to use in collaborative R&D projects.

Cyan Tec's advanced laser cell will further enhance the welding capabilities of the Nuclear AMRC to support manufacturing process development for key nuclear components. One example is the duplex steel boxes used to store hazardous waste from Sellafield and other decommissioning sites – laser welding can significantly reduce manufacturing times and costs while maintaining a high quality of weld seams. The innovative Cyan Tec welding cell will be used to develop and optimise these welding processes, as part of a programme to save hundreds of millions of pounds over the life of the decommissioning programme.

The system is designed for deep penetration welding for R&D of laser and hybrid laser and arc welding. With the highest power Disk laser in the UK, delivered by fibre optic cable, the system will have a wall-plug efficiency higher than 30%, and is fully protected against back reflection which is vital in high power welding of reflective materials.

Integrated with a 6-axis gantry system, the overall cell has the capability of delivering a simultaneous MIG weld for deep penetration hybrid welding with hot wire or cold wire feed.  The system includes a large tilt and turn manipulator which can carry components up to 15 tonnes and overall the advanced CNC controller is able to interpolate all 8 axes simultaneously to weld complex seams with perfect results. Such a system is a challenge for an integrator of automation and CNC systems, but falls easily within the capabilities of Cyan Tec’s team of experienced laser integration engineers.

With such a high average laser power delivered by fibre optics, and a system capable of steering the beam in all directions, laser safety is extremely important.  Cyan Tec have developed their own safety solution, comprising an active guarding laser safety enclosure of dimensions 10 m x 7 m and 6 m high. The safety system has an actively monitored cavity wall with instant shut-down in the event of any break-through of the outer layer.

Modern motion systems are faster, have higher accuracy and vastly-improved repeatability compared to previous generations. Cyan Tec Systems has experience of integrating robots and CNC systems with lasers from all the major suppliers and can offer expert advice on the most appropriate solution for laser processing. Standard and bespoke systems are offered with a full service from design through manufacture; a large installed base worldwide is supported by a dedicated team of engineers.

Labels: Cyan Tec,laser welding,nuclear decommisioning,United Kingdom

Back Back to News
 

Illuminating Products

Copyright © 2017 Novus Media Today Group, LLC. All rights reserved. Website design and build by MM Design.