MACOM Technology Solutions Inc. announced the MAOM-00641X series of three surface mount 64 Gbaud linear modulator drivers to enable the next generation of high capacity coherent transmission systems.
Leveraging existing fiber installations, today’s service providers are challenged to maximize their bandwidth and increase their data throughput-per-fiber. By maximizing the data rate on a single wavelength, operators can increase capacity and reduce the overall cost-per-bit of transmission. The transition to 100G has been enabled by coherent technology, while continued evolutions in PHY technology have provided the pathway to 200G, 400G and beyond.
Due to the shorter reach requirements, metro networks can use higher order modulation formats up to 64 QAM at baud rates of 64G, to achieve data rates of 600G on a single wavelength. The next generation CFP2-ACO with 64G/64QAM capability, currently being standardized by the OIF, will therefore enable capacity of 4.8Tbps per RU – a 3X improvement over current solutions.
The MAOM-00641X series of modulator drivers have differential inputs and single-ended outputs for use with indium phosphide and lithium niobate modulators. They are available in the 14mm x 9mm surface mount package which was pioneered by MACOM and has since become the de-facto standard for modulator drivers used in the CFP2-ACO. The devices boast high bandwidth to support 64 Gbaud and excellent linearity to support 64 QAM modulation, while power dissipation can be optimized for the specific type of modulator.
MACOM’s MAOM-006417 is on display at OFC 2017, Booth #1736
Back to Products
