Optomec - a global supplier of production-grade additive manufacturing systems for the 3D printing of metals, today announced the new LENS Laser Deposition Head (LDH 3.X), with a variable optics system that can create three discreet focused spot sizes to accommodate changes in laser power. The LDH 3.X supports a wide range of laser powers from 500 W to 3 kW to ensure optimal DED processing across a range of parts and applications.
Harnessing higher laser power for optimal DED processing
The wide range of laser powers supported by the LDH 3.X is enabled by an advanced cooling system that allows for high-power duty cycles, and variable optics the user can control to keep processing optimal over the full range of laser power. With improved channeling for water cooling the head, the LDH 3.X will not overheat while operating at high powers and for long build times. Adding to the versatility of the head, the new LDH 3.X has a quick connect/disconnect nozzle system allowing for interchanging of nozzle types depending on the application (i.e. 4-tip, coax, high overhang, etc.).
By enabling users to vary the optics, create multiple focused laser spot sizes, use interchangeable nozzles and work with a range of laser powers, the LDH 3.X is effective for a variety of industrial applications including small to large builds, high deposition rates at high powers, repairs, coatings, and cladding operations. With LDH 3.X, a 0.6 mm focused spot size can be chosen for processing smaller parts or intricate feature building, then switched to 2 or 3 mm focused spot sizes for increased laser powers for larger builds or clad type operations.
The Optomec LENS LDH 3.X is available immediately for most Optomec LENS system models at a starting price of $10,000 to upgrade from LDH 2.0. Variable optics and nozzle types are sold separately. Material starter recipes are available to help speed adoption.